1.1 First charge

When you receive the battery, please do not use it directly, but to fully charge it first with the specific Lipo balance-charger.

1.2 Charger

Use specific Lipo balance-charger only. Other types of charger are not recommended to charge our batteries. 

1.3 Charging Current

Never charge batteries with current over the maximum charging current which was regulated by specifications (1-2C in general), strongly recommended should not exceed 5C. Higher setting may lead to charging insufficiency, inferior in performance, heating and even leakage. 

1.4 Charging Voltage

Charging Voltage should be controlled around 4.20V and under any condition should not beyond the regulated limit voltage (4.25V/cell). As for battery pack in series, please choose balance charging or charge each cell respectively. Series charging is not recommended. If the charging voltage is too high or you choose series charging, over-charge may occur. All these may result in battery swelling, heating or even leakage, severely deteriorating batteries’ performance and cycle life.

1.5 Charging Temperature

Batteries must be charged at a place within the temperature ranged from 15?栴o 35?欠or it may lead to the reduction of charging &discharging efficiency, charging insufficiency.

1.6 Reverse charging is prohibited

Please correctly connect the positive (+) and negative (-) electrode of the battery, and strictly avoid reverse charging. Otherwise, the battery would not be chargeable. Meanwhile, reverse charging will reduce the charging& discharging performance and security of the battery, even result in heating or leakage.

1.7 Disposal of abnormal phenomena while charging

If there’s any abnormal condition occurs during the charging process, please discontinue the charging process immediately and consult relevant professionals for disposal.